For 2 Rows of Solar modules Vertical . Range of tilt 10°-35°
Components of the Mounting Structures (
- Mounting systems of PD.2C.8R.2P-200 /10°-35° with range tilt change 10 ~ 35 degrees , which includes:
- 2 Driven Piles foundations type U , front & Rear , made of Hot Dip Galvanized Steel
- Rails for changing tilt made of galvanized steel, made of galvanized steel,
- 1 Rafter Rails type U made of galvanized steel,
- Fasteners (Bolts , nuts , washers etc)
- 4 rows of rails for placing the panels , type 40x60 made of galvanized steel
- Connectors for the rails , including 4 bolts, washers and nuts
- Diagonal Bracings type " |Χ| " in every table , made of galvanized steel
- Mounting Clamps made of stainless steel or aluminum , with stanless steel bolt and plastic isolator betwee the panel and the galvanized rail
Dimentions of the solar modules
~ 2050--2400mm x 990--1340 mm (L x W )
Technical Detailes
- Length of the table must be no longer than 23 meters (2x22panels) so to be more convinient the procudere of the change
- Driven Piles ar Hot Dip Galvanized
- The upper structure is made of steel Z275 or/and upper class of galvanization
- Mounting Clamps are made of stainless steel or aluminum
- The Span of the piles in East-West direction, depents of the snow load and the wind load .
- Pair of Driven Piles
- Sets of the upper structure 10-35 μοίρες
- Sets of Diagonal Braces |Χ|
- Rails for the Solar Panels (τεγίδες)
- Connectors of the rails
- Middle Clamps
- End Clamps
2-4 times per year
For more informatin , conntact us
